Nu-Brite Condenser Coil Cleaner

Code: CHM00773
Nu-Brite Condenser Coil Cleaner
  • No. 1 Coil Cleaner in the HVAC-R Industry!
  • Cuts through grease and grime better than acids
  • High foaming chemistry to lift dirt out of coil
  • Brightens the condenser coils extremely well
  • Available in traditional and concentrate formulas

In Stock
GSD HVAC Technologies 100% Original100% ORIGINAL
GSD HVAC Technologies Order Delivery3-4 DAYS DELIVERY
GSD HVAC Technologies WarrantyWARRANTY

Description

Nu-Brite Condenser Coil Cleaner

The Nu-Brite is #1 coil cleaner (Nu-Calgon product) in the HVAC-R market. It foams and brightens, and it is an equally effective yet safer alternative to acids. It produces a high volume of foam and cleans more effectively than acids.

Nu-Brite is a non-acid, alkaline-based product for cleaning and brightening air cooled condensers. It is formulated with the best available foaming detergents and chelants to quickly penetrate and dissolve greasy dirt and grime and foam it right out of the coil. The safer alternative to acids.

For cleaning and brightening air cooled condensers and other finned heating and cooling coils located outside. It is an alkaline based cleaner that does all that an acid will do without the danger of an acid. Nu-Brite’s state-of-the-art surfactants and cleaners instantly penetrate and lift layers of oily grime and corrosive deposits from the coil. Its foaming action pushes this loosened debris out of hard-to-reach areas restoring equipment to peak efficiency. It is for outdoor use only.

Directions:Use this product in accordance to the following directions by HVAC-R professionals only.

  • Apply only on condenser coils, or other finned coils.
  • Use (PPE) goggles, gloves and other protective garments before the cleaning procedure.
  • Shut off the system.
  • Prepare cleaning solution by mixing one part Nu-Brite with three to four parts of water.
  • Add the water to the sprayer first, then add the cleaner. If using the No. 200P, you will add the Nu-Brite first.
  • Apply with any one of the quality sprayers.
  • Spray cleaning solution onto dirty coils or surfaces and allow it to remain in contact with the dirty surfaces for 5-10 minutes.
  • Rinse thoroughly with water.
  • Then return the system to service.
  • Rinse out sprayer as well as its spraying wand and nozzle.

Additional information

Weight4 kg
Dimensions20 × 20 × 30 cm
Product Group

Chemicals, Maintenance and Cleaners

Reviews

There are no reviews yet.

Be the first to review “Nu-Brite Condenser Coil Cleaner”

Your email address will not be published. Required fields are marked *

You may also like…

  • Trane OIL0025E Oil; Refrigeration Lubricant, R22, Semi-Synthetic
    Oils and Chemicals

    OIL0025E Compressor Oil

    Trane OIL0025E Oil; Refrigeration Lubricant, R22, Semi-Synthetic
    (0 reviews)